Technical specification for the Hypervolt Home 2.0 EV Charger
Product Information
Model: Hypervolt Home 2.0
Connection Capacity: Single Phase, 7kW AC
Charging Connector: Tethered, IEC 62196/Type 2 OR SAE J1772/Type 1
Tethered Cable Length (m): 5 / 7.5 / 10
Dimensions (mm): 328 (H) x 243 (W) x 101(D)
Mounting Type: Wall/Pole mounted
Colour: Ultra White/ Ultra Black / Space Grey
Weight: 5.2 Kg
Unit Material: ABS composite
Charging Protocol / Mode : Mode 3 (compliant with IEC 61851-1)
Connectivity
WiFi: Wi-Fi 802.11b/g/n @2.4 GHz
Bluetooth: Adoption via bluetooth low energy
GPRS/3G/4G: Optional
Network Security: State-of-the-art Cryptography Engine for fast and secure WLAN Connections with 256-Bit Encryption.
App: Charger control functions via the Hypervolt app.
Electrical Properties
Rated supply voltage: 230V AC – Single Phase (± 10% AC)
Rated power: 7.4 kW
Output supply: AC 230V 7.4 kW Single Phase
(Note: May vary based on vehicle make and model as well as electrical installation setup.)
Mains Frequency: 50 Hz
Rated impulse withstands voltage: 4000V
Rated peak withstands current: 1000A @ 1ms
Energy Monitoring: Power and energy monitoring via. MID grade meter.
Rating against shock: Class I Equipment
Type of system earthing: TN-C-S & TN-S (PEN Fault Protection) or TT
Electromagnet Compatibility (EMC): Classification Type B
Standards and Compliance
EMC Compliance: EN 61000-6-3:2006, EN 61000-6-2:2019
Safety Compliance: Low Voltage Directive (LVD) 2014/35/EU, EN 60950-1:2006 + A11 + A1, EN 60950-22:2006
EV Charging Compliance: Fully compliant with Amendment 1 of BS7671:2018. EN 61851-1:2019, EN 61851-21:2002, EN 61851-22:2002, IEC 62196-1, IEC 61851-1, BS 7671:2018 + A1:2020.
Environment
Operating Temperature: -25 to 40 °C
Operating Humidity: Up to 95% RH, non-condensing
Environmental Protection: IP54
Pollution degree: 3
Maximum Altitude Level: 2000m
Protection
Built in RCD: Internal 6mA DC ground fault current detection (compliant with BS 7671:2018).
Built in PEN Fault: Comes with integrated PEN fault protection compliant with Amendment 2 of BS7671:2018.
Current Limit: Power and energy monitoring as standard; optional MID grade metering is available.
Overcurrent protection: Upstream circuit breaker (not supplied)
Mechanical impact protection: IK08
Features
Status Indication/HMI: Multi-colour LED ring along the side of the enclosure and via the logo on the front of the enclosure.
Charging modes: Eco, Super Eco and Boost
Additional
Access: Non-restricted
Use: Can be operated by ordinary people. (Keep clear of children / the unit should only be opened for servicing and repairs which should be conducted by Hypervolt approved personnel only, please see page 3 for safety notice).