How to download and set up the Hypervolt Installer App
Download and Install the Mobile App
The app is free and can be downloaded from either the Google Play Store (Android) or App Store (Apple). Follow the instructions below to get set up for the first time.
Account Setup
You will need to create an account in order to control your charger(s) using the mobile app. You can use your preexisting Apple or Google account to sign in, or you can create a new username/password combination to use for your Hypervolt account.
If you have a preexisting account, select the Sign In option at the bottom of the screen and enter your account information to proceed.
Bluetooth Configuration
The Installer App uses Bluetooth to connect to the charger for the commissioning and configuration process. After you've installed the app, you will need to grant permissions for it to use Bluetooth on your device.
1. Make sure you have Bluetooth enabled
2. Launch the Hypervolt Installer app on your device.
3. You'll get prompted to grant Bluetooth access:
If you press [don’t allow] we will display the following screen. Tap [continue] and enable Bluetooth in the settings screen on the phone.
Once Bluetooth is enabled and the permissions are accepted, you are ready to go!